2.2 KiB
2.2 KiB
Enclosed Box Mounting System
Please see entry.scad for config and building. Make sure the correct rack profile is configured in rackFrame.scad.
- This system comprises three parts: two side rails, and a front plate.
- This system is useful for mounting heavier box-shaped things. It works by first sliding in the box inside the side rails (which secures
x,z, and one half of theyaxis), and then mounting the front plate along the main rails (fully securing theyaxis). - Side rails will most likely require supports to print.
- For wider boxes (nearing the
maxUnitWidthof the rack), you will have to setrecessSideRailto true. This is so the side rails do not collide with the main rack rails.
BOM:
| Item | Name | Quantity | Comment |
|---|---|---|---|
 |
M3x12 FHCS | 8 | Extras are useful and inexpensive. If you plan on eventually stacking multiple racks together, don't hesitate to get a lot more. |
 |
M3 hex nut | 8 | ☝️ |
|
M4x12 FHCS | 4 | ☝️ |
|
M4 hex nut | 4 | ☝️ |