caa7073d2f
Add new catalog items ( #39 )
...
120mm Rear Case Fan - Designed to be mounted on the rear face of the rack, with the case holding the fan on the exterior of the rack rather than the interior.
Beelink EQi12 Box - I originally created a Tray for the EQi12, but with it's lack of mounting points the device would shift. This box is the same as the enclosed box, however with the specific measurements of the EQi12.
Unifi 8 port PoE Switch - I originally intended to use the Enclosed Box for this, however due to the bevels on every corner of this device, the box was unable to secure the switch. Instead, I created a custom mounting adapter to latch the switch to a tray, which is much easier to print and with less filament overall.
2025-03-17 23:20:47 -04:00
179c0e530f
add custom build ( #12 )
...
Co-authored-by: Chaim Turkel <chaim.turkel.external@IL-ChaimTikal.local >
2025-02-16 16:33:12 -05:00
2394d33a16
Fix dimensions path in rbuild.py ( #30 )
2025-02-16 16:30:21 -05:00
0bd69808b4
add option to center patch panel
2025-02-08 12:14:59 -05:00
1487717966
Add comment regarding usable base width ( #26 )
2025-01-15 20:46:28 -05:00
3b1de0eab5
Add dev container configuration ( #23 )
...
* add devcontainer support files
* update rbuild to look in /usr/bin/openscad-nightly for openscad-nightly
2025-01-15 20:45:36 -05:00
bb37a3fa34
Document what hardware is required for each rack mount items ( #20 )
2024-12-26 13:36:32 -05:00
3ea9bda2da
120mm Fan Tray + 3 mini pc trays ( #18 )
...
Add 120mm Fan Tray + 3 mini pc trays
NOT COMPATIBLE WITH NANO PROFILE
The Fan tray and Mini PC trays in this pull request are only compatible with the Micro and Mini rackstack profiles.
2024-11-21 17:40:53 -05:00
c1c93a3dd5
add angle bracket mounting system
2024-10-19 17:30:32 -04:00
d3da0510ba
regen stls
2024-10-19 14:54:22 -04:00
d30a4b3931
Merge pull request #15 from jazwa/fixed-module-option
...
Fix side modules. They are now fixed on the yBars. This means a "left" and "right" yBar must be introduced for symmetry. Old behavior can be enabled by setting fixedSideModules to false in config/rackFrame.scad.
2024-10-19 14:33:48 -04:00
520ee9eadf
Add option for fixed side modules. This simplifies assembly and removes some awkward printing topology
2024-10-19 14:30:55 -04:00
cab2d1c6c9
Small comment fix
2024-08-25 22:56:29 -04:00
2b1d694d4c
Add new catalog directory to store various rack-mount part configs. Also add some old beelink and mele mini pc tray configs.
2024-08-25 22:48:44 -04:00
9273e5c2c2
Small fix to one-off rpi case
2024-04-25 23:54:13 -04:00
d46b778560
side wall improvements: add option to not include ventilation holes for side walls, and add horizontal bracing
2024-02-25 11:14:31 -05:00
3c7dd8985f
fix extra slack being applied to hex nut pockets, should help with slipping
2024-02-25 10:58:49 -05:00
e124297636
Merge pull request #8 from JosephGregg/automate-openscad-path
...
add logic to determine running OS and set path
2023-11-19 19:20:21 -05:00
5fce66617f
add logic to determine running OS and set path
2023-10-20 08:08:14 -04:00
be5ed83932
update rbuild comments and readme with windows support
2023-09-13 21:40:41 -04:00
f358b16ed0
comment for custom profile generation
2023-09-06 20:43:00 -04:00
d7fea32b09
update readme to point harder at the eval print
2023-09-06 20:40:39 -04:00
240ee21bd0
regen stls
2023-09-04 15:05:20 -04:00
7270e91a8a
fix screw slack value
2023-09-03 20:05:36 -04:00
52e88edb89
touch up readmes
2023-09-01 16:46:29 -04:00
529123eb5b
add animation gifs for new rack-mount systems, also update rbuild and the main readme to reflect these changes
2023-09-01 16:42:31 -04:00
be3020cbb1
further work on rack-mount refactor
2023-09-01 15:30:16 -04:00
658fcf9948
Improve rack-mount. Individual rack-mount systems are now organized in their own directories, with a standard entry.scad file.
2023-08-31 00:20:12 -04:00
3167feea03
improve support side rail. also begin refactoring rack-mount to make more friendly
2023-08-28 23:31:06 -04:00
54647aa334
remove mentions of heatset inserts
2023-08-26 17:26:29 -04:00
a717ef15e8
improve tray part
2023-08-26 17:23:53 -04:00
cd9a29848e
add dimensionHelper
2023-08-20 10:19:42 -04:00
386acb0393
readme comment about building on windows
2023-08-20 09:56:31 -04:00
f9f9f48855
simplify config structure, also small doc changes
2023-08-20 09:44:29 -04:00
70cd4b8eda
regen stls and update docs
2023-08-19 18:31:24 -04:00
cb4cbd4a2a
Create LICENSE
2023-08-19 17:48:28 -04:00
6216627a2e
update gitignore, and regen stls
2023-08-19 17:20:12 -04:00
9c166de74f
update readme
2023-08-19 17:09:09 -04:00
fc2aa23c4d
update
2023-08-19 01:16:45 -04:00
8e91643506
update readme
2023-08-18 18:49:42 -04:00
e7ba539e90
update variables
2023-08-18 00:29:41 -04:00
717d323264
some more cleanup
2023-08-17 23:54:58 -04:00
63af3ac058
cleanup
2023-08-17 23:44:23 -04:00
122b45aef4
temp stl
2023-08-17 19:36:55 -04:00
095f4ad564
remove todo comment
2023-08-13 15:17:41 -04:00
15c261228b
fix rbuild script
2023-08-13 15:17:20 -04:00
7b0ea16b04
fix ventilation for sidewalls
2023-08-13 12:51:21 -04:00
07dee71795
improve rack ears
2023-08-13 00:55:47 -04:00
eef5329448
change default conf to micro
2023-08-12 13:57:52 -04:00
92c1117e25
refresh
2023-08-12 13:57:06 -04:00
George Luetkemeyer