5bfb76a4ed
* Add files via upload 120mm Rear Case Fan - Designed to be mounted on the rear face of the rack, with the case holding the fan on the exterior of the rack rather than the interior. Beelink EQi12 Box - I originally created a Tray for the EQi12, but with it's lack of mounting points the device would shift. This box is the same as the enclosed box, however with the specific measurements of the EQi12. Unifi 8 port PoE Switch - I originally intended to use the Enclosed Box for this, however due to the bevels on every corner of this device, the box was unable to secure the switch. Instead, I created a custom mounting adapter to latch the switch to a tray, which is much easier to print and with less filament overall. * LG DVD Burner Slim Quick and easy tray designed to house a slim portable DVD reader/writer. Mount using velcro strips or adhesive.
26 lines
601 B
OpenSCAD
26 lines
601 B
OpenSCAD
use <../tray/tray.scad>
|
|
|
|
/*
|
|
Simple tray for a LG Slim Portable DVD Writer.
|
|
|
|
Please make sure to configure the correct rack frame dimensions in rackFrame.scad.
|
|
|
|
Remember to use Velcro strips to secure the drive to the tray!
|
|
*/
|
|
|
|
bottomScrewTray (
|
|
u = 1,
|
|
trayWidth = 150,
|
|
trayDepth = 145,
|
|
trayThickness = 3,
|
|
frontLipHeight = 0,
|
|
backLipHeight = 0,
|
|
// mountPoints = [[27.5, 34], [107, 34]],
|
|
frontThickness = 3,
|
|
sideThickness = 3,
|
|
mountPointElevation = 1,
|
|
mountPointType = "m3",
|
|
sideSupport = true,
|
|
trayLeftPadding = 15
|
|
);
|