# Enclosed Box Mounting System

![demo](./animate.gif)

Please see [entry.scad](./entry.scad) for config and building. Make sure the correct rack profile is configured in [rackFrame.scad](../../config/rackFrame.scad).

- This system comprises three parts: two side rails, and a front plate.
- This system is useful for mounting heavier box-shaped things. It works by first sliding in the box inside the side rails (which secures `x`, `z`, and one half of the `y` axis), and then mounting the front plate along the main rails (fully securing the `y` axis).
- Side rails will most likely require supports to print.
- For wider boxes (nearing the `maxUnitWidth` of the rack), you will have to set `recessSideRail` to true. This is so the side rails do not collide with the main rack rails. 

### BOM:

| Item                                                          | Name                      | Quantity | Comment                                                                                                                          |
|---------------------------------------------------------------|---------------------------|----------|----------------------------------------------------------------------------------------------------------------------------------|
| <img src="../../media/bom/fhcs_medium.gif"  height="60" width="72"> | M3x12 FHCS                | 8        | Extras are useful and inexpensive. If you plan on eventually stacking multiple racks together, don't hesitate to get a lot more. |
| <img src="../../media/bom/hex_nut.gif"  height="60" width="72">     | M3 hex nut                | 8        | ☝️                                                                                                                               |
| <img src="../../media/bom/fhcs_medium.gif"  height="60" width="72"> | M4x12 FHCS                | 4        | ☝️                                                                                                                               |
| <img src="../../media/bom/hex_nut.gif"  height="60" width="72">     | M4 hex nut                | 4        | ☝️                                                                                                                               |