clean up

.gitignore

@@ -0,0 +1,2 @@
+*~
+[#]*

cases/rockpro/#case.scad#

@@ -1,197 +0,0 @@
-// test for screw tolerances
-
-include <./rockpro.scad>;
-
-include <../power/src/base.scad>;
-$fn = 128;
-outerD = 4.65;
-
-innerD = 2.93;
-
-
-module caseOuter() {
-    rotate(a=[90,0,0])
-    minkowski() {
-        cube(size=[80,40,195], center=true);
-        cylinder(h=0.00000000001, r=10);
-    }
-}
-
-module caseInner() {
-    translate(v=[0,0,2])
-    rotate(a=[90,0,0])
-    minkowski() {
-        cube(size=[81.5,47,195+0.01], center=true);
-        *cylinder(h=0.00000000001, r=5);
-    }
-}
-
-
-module hgill(i) {
-  minkowski() {
-    *sphere(r=2);
-              translate(v=[0,i*10,5])
-              rotate(a=[30,0,0])
-              cube(size=[200, 4, 30], center=true);
-          }
-    }
-
-module caseShell() {
-    difference() {
-        caseOuter();
-
-        union() {
-          caseInner();
-
-          // side perforations
-          for (i=[-7:7]) {
-              hgill(i=i);
-          }
-
-          // top perforations
-          for (i=[-3:3]) {
-            translate(v=[0,i*20,50])
-            cube(size=[75,10,60], center=true);
-          }
-
-          // bottom perforations
-          for (i=[2:4]) {
-            translate(v=[0,i*20,-20])
-            cube(size=[60,8,50], center=true);
-          }
-
-          for (i=[-4:0]) {
-            translate(v=[0,i*20,-20])
-            cube(size=[60,8,50], center=true);
-          }
-          
-        }
-    }
-}
-
-
-module faceMountDiffs() {
-translate(v=[45,0,20])
-rotate(a=[90,0,0])
-cylinder(r=innerD/2,h=300, center=true);
-
-translate(v=[45,0,-20])
-rotate(a=[90,0,0])
-cylinder(r=innerD/2,h=300, center=true);
-
-translate(v=[-45,0,-20])
-rotate(a=[90,0,0])
-cylinder(r=innerD/2,h=300, center=true);
-
-translate(v=[-45,0,20])
-rotate(a=[90,0,0])
-cylinder(r=innerD/2,h=300, center=true);
-}
-
-
-module caseWithMountHoles() {
-  difference() {
-
-    union() {
-      caseShell();
-
-      translate(v=[-35, 25,-27.5])
-      rotate(a=[0,0,-90])
-      rockProMountPoints(6, 3.8, 64, false);
-    }
-
-    union() {
-      translate(v=[-35, 25,-27.5])
-      rotate(a=[0,0,-90])
-      rockProMountPoints(6, innerD/2, 64, false);
-
-      faceMountDiffs();
-    }
-  }
-}
-
-*caseWithMountHoles();
-
-
-module bottomTray() {
-difference() {
-
-union() {
-intersection() {
-  caseWithMountHoles();
-  translate(v=[0,0,-115])
-  cube(size=[500,500,200], center=true);
-}
-
-translate(v=[-45.5,0,-15])
-rotate(a=[90,90,0])
-joinTriangle(185);
-
-translate(v=[45.5,0,-15])
-rotate(a=[90,90,0])
-joinTriangle(185);
-}
-
-  // bottom lugs
-  union() {
-    translate(v=[-40,-90,-29])
-    cube(size=[10.2,10.2,2.5], center=true);
-
-    translate(v=[40,-90,-29])
-    cube(size=[10.2,10.2,2.5],center=true);
-
-    translate(v=[40,90,-29])
-    cube(size=[10.2,10.2,2.5],center=true);
-
-    translate(v=[-40,90,-29])
-    cube(size=[10.2,10.2,2.5],center=true);
-  }
-}
-}
-
-
-module topTray() {
-  difference () {
-    union() {
-      difference() {
-        caseWithMountHoles();
-        translate(v=[0,0,-115])
-          cube(size=[500,500,200], center=true);
-      }
-    }
-    // bottom lugs
-    union() {
-      translate(v=[-40,-90,29])
-        cube(size=[10.2,10.2,2.5], center=true);
-
-      translate(v=[40,-90,29])
-        cube(size=[10.2,10.2,2.5],center=true);
-
-      translate(v=[40,90,29])
-        cube(size=[10.2,10.2,2.5],center=true);
-
-      translate(v=[-40,90,29])
-        cube(size=[10.2,10.2,2.5],center=true);
-
-      
-      
-      translate(v=[-45.5,0,-15])
-        rotate(a=[90,90,0])
-        scale(v=[1,0.9,1])
-        joinTriangle(300);
-
-      translate(v=[45.5,0,-15])
-        rotate(a=[90,90,0])
-        scale(v=[1,0.9,1])
-        joinTriangle(300);
-    }
-  }
-}
-
-topTray();
-
-// TODO make sure rail works!!!
-
-
-scale(v=[1,0.9,1])
-*joinTriangle(10);

cases/rockpro/.#case.scad

@@ -1 +0,0 @@
-zhao@zhao-desktop.12910:1649003030