ben/rackstack
1
0
Fork 0
Code Packages Releases Wiki Activity

simplify config structure, also small doc changes

Browse Source
This commit is contained in:
zhao
2023-08-20 09:44:29 -04:00
parent 70cd4b8eda
commit f9f9f48855
57 changed files with 21 additions and 21 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -52,8 +52,8 @@ Please see [the assembly guide](./assembly-guide).
#### Notes:
- Before printing the actual parts. It's recommended to print this evaluation part: [eval_P.scad](./rack/print/eval_P.scad) to test tolerances. If you find the fits too tight/loose, you can adjust them [here](./config/slack.scad).
- Please also adjust [this file](./config/slicer.scad) to match your slicer settings.
- Before printing the actual parts. It's recommended to print this evaluation part: [eval_P.scad](./rack/print/eval_P.scad) to test tolerances.
If you find the fits too tight/loose, you can adjust them [here](./config/print.scad). Please make sure also adjust the layer height in that file, too.
- Omitted actual plastic for printing. Any conventional 3d printing plastic should do (PLA, PETG, ABS),
but beware of PLA's thermal limits. Higher infill is recommended for all parts.
- For joining two racks, you will need to print 4 [rackJoiners](./rack/print/rackJoiner_P.scad), as well as 8 M3 hex nuts, and 8 M3x12 FHCS.