WIP readmes and instructions

README.md

@@ -19,26 +19,17 @@ These STLs are generated from the files in [rack/print](rack/print), and [rack-m
 (supports, orientation) can be found in their respective `.scad` files.
 
 ### Assembly Instructions
-
+Please see [the assembly README here](./assembly)
 ### BOM
 
-TODO
-
-- A bunch of m3 screws for constructing the actual rack.
-- A bunch of m4 screws for the main rails
-- Some heatset inserts
-- A bunch of m3 hex nuts
-- m3 allen key (preferably with a rounded end)
-- m4 allen key
-- 2 dowel pins
-- 8 magnets
+WIP
 
 | Item                        | Quantity | Comment                                               |
-|-----------------------------|--------------|-------------------------------------------------------|
-| M3x5 FHCS                   | left-aligned |                                                       |
-| M3x8 FHCS                   | centered     |                                                       |
+|-----------------------------|----------|-------------------------------------------------------|
+| M3x6 FHCS                   | 24       |                                                       |
+| M3x10 FHCS                  | 12       |                                                       |
 | M3 hex nut                  | 4        |                                                       |
-| M3 Brass Heatset Insert ()  | 32           |                                                       |
+| M3 Brass Heatset Insert     | 32       |                                                       |
 | 3x10mm steel dowel pin      | 4        | Not strict: dimensions can be changed. Please see ... |
 | 6x2mm neodymium disc magnet | 8        | 6mm diameter, 2mm height                              |
 |                             |          |                                                       |

assembly/README.md

@@ -0,0 +1,50 @@
+# Rack Assembly Instructions
+
+**Note**: This rack uses two different types of M3 flat heat screws: a 6mm length screw, referred to as type A; and a 10mm length screw, referred as type B.
+
+
+TODO: Add image reference for parts
+
+## Instructions:
+Insert heatset inserts into Y-bars - 4 times:
+![insert heatset inserts](./insertHeatsetInserts.gif)
+
+Glue magnets into magnet side-modules - 4 times:
+![glue magnets to magnet modules](./magnetToMagnetModule.gif)
+
+Glue top and bottom magnets into side walls - 2 times:
+![glue magnets to side walls](./magnetToSideWall.gif)
+
+Insert top and bottom dowel rods into side walls - 2 times:
+![insert dowels into side walls](./insertDowels.gif)
+
+Slide Y-bars into X-bars - 2 times:
+![slide y-bar into x-bar](./slideYBarIntoXBar.gif)
+
+Screw together Y-bars and X-bars using 4 B-type screws (one screw per corner) - 2 times: 
+![attach x-bar with y-bar](./screwYBarXBar.gif)
+
+Screw in the side-modules with A-type screws: two magnet side modules in front with the magnets facing outwards, and two dowel holder side modules in the back - 2 times:
+![attach side connector modules to y bars](./screwYBarSideModules.gif)
+
+Screw in the main rails with A-type screws:
+![connect xy-tray with main rails](./screwYBarMainRail.gif)
+
+
+Prop us the side wall using the side modules. Make sure the dowels are inserted properly, and the magnets align:
+![prop up side walls](./slideInSideWall.gif)
+
+Slide in the other (top) tray. Make sure the magnets and dowels align. Screw in the main rails with A-type screws:
+![attach xy-trays](./connectXYTrays.gif)
+
+Slide in hex nuts into feet - 2 times:
+![slide hex nuts into feet](./slideHexNutToFeet.gif)
+
+Insert feet into the bottom of the rack: 
+![insert feet](./slideFeetIntoYBar.gif)
+
+Screw in feet using 4 B-type screws:
+![screw feet](./screwFeetIntoYBar.gif)
+
+Finally, attach the top and bottom plates with 4 A-type screws each:
+![attach xy-plates](./screwXYPlates.gif)