Add new catalog items (#39)
120mm Rear Case Fan - Designed to be mounted on the rear face of the rack, with the case holding the fan on the exterior of the rack rather than the interior. Beelink EQi12 Box - I originally created a Tray for the EQi12, but with it's lack of mounting points the device would shift. This box is the same as the enclosed box, however with the specific measurements of the EQi12. Unifi 8 port PoE Switch - I originally intended to use the Enclosed Box for this, however due to the bevels on every corner of this device, the box was unable to secure the switch. Instead, I created a custom mounting adapter to latch the switch to a tray, which is much easier to print and with less filament overall.
This commit is contained in:
George Luetkemeyer
committed by
GitHub
GitHub
parent
179c0e530f
commit
caa7073d2f
169
rack-mount/catalog/Unifi-8-PoE-Switch_Tray+Adapter.scad
Normal file
169
rack-mount/catalog/Unifi-8-PoE-Switch_Tray+Adapter.scad
Normal file
@ -0,0 +1,169 @@
|
||||
use <../tray/tray.scad>
|
||||
|
||||
/*
|
||||
Simple tray for a Unifi Lite 8PoE Switch.
|
||||
Included mounting adapter, mounting adapter seats two M3 Hex nuts using two M3x8 screws.
|
||||
DO NOT USE INCLUDED SCREWS FROM UNIFI, this will damage the switch.
|
||||
|
||||
Please make sure to configure the correct rack frame dimensions in rackFrame.scad.
|
||||
*/
|
||||
|
||||
|
||||
///////////////////////////////////////
|
||||
/////////// MOUNTING TRAY ////////////
|
||||
/////////////////////////////////////
|
||||
difference () {
|
||||
bottomScrewTray (
|
||||
u = 3,
|
||||
trayWidth = 175,
|
||||
trayDepth = 110,
|
||||
trayThickness = 3,
|
||||
frontLipHeight = 7.5,
|
||||
backLipHeight = 7.5,
|
||||
mountPoints = [[54, 40], [54+60.325, 40]],
|
||||
frontThickness = 3,
|
||||
sideThickness = 3,
|
||||
mountPointElevation = 1,
|
||||
mountPointType = "m3",
|
||||
sideSupport = true,
|
||||
trayLeftPadding = 2.5
|
||||
);
|
||||
|
||||
// Front Center Cube
|
||||
translate(v=[87.5, 20, -50])
|
||||
rotate(a=[90,0,45])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
// Center Right Cube
|
||||
translate(v=[58, 50, -50])
|
||||
rotate(a=[90,0,45])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
// Center Left Cube
|
||||
translate(v=[117.5, 50, -50])
|
||||
rotate(a=[90,0,45])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
// Rear Left Cube
|
||||
translate(v=[67.5, 60, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
// Rear Center Cube
|
||||
translate(v=[87.5, 77, -50])
|
||||
rotate(a=[90,0,45])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
// Rear Right Cube
|
||||
translate(v=[103.5, 60, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[12,12,135]);
|
||||
|
||||
|
||||
// Side Front Right Cube
|
||||
translate(v=[132.5, 10, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[25,12,135]);
|
||||
|
||||
// Side Front Left Cube
|
||||
translate(v=[37.5, 10, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[25,12,135]);
|
||||
|
||||
// Side Rear Right Cube
|
||||
translate(v=[132.5, 65, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[25,12,135]);
|
||||
|
||||
// Side Rear Left Cube
|
||||
translate(v=[38.5, 65, -50])
|
||||
rotate(a=[90,0,0])
|
||||
rotate(a=[0,90,90])
|
||||
cube(size=[25,12,135]);
|
||||
|
||||
}
|
||||
|
||||
///////////////////////////////////////
|
||||
////////// MOUNTING ADAPTER //////////
|
||||
/////////////////////////////////////
|
||||
|
||||
// Seat Teeth
|
||||
translate (v= [0,1.5,0.1,]){
|
||||
translate(v=[54.25 + 15 -1.25, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
translate(v=[54.25 + 20 -1.25, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
translate(v=[54.25 + 25 -1.25, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
|
||||
translate(v=[54.25 + 15 -1.25 + 22, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
translate(v=[54.25 + 20 -1.25 + 22, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
translate(v=[54.25 + 25 -1.25 + 22, 5.5 + 13.51875, 10+2.25]) {
|
||||
cube(size=[1.5875, 6.5, 1.5875]);
|
||||
}
|
||||
}
|
||||
|
||||
// Seat Key
|
||||
difference () {
|
||||
translate(v=[54.25, 5.5 + 13.51875, 10+3.175]) {
|
||||
cube(size=[59.53125, 9.5, 1.5875]);
|
||||
}
|
||||
translate(v=[45 + 38.89375, 19, 12]) {
|
||||
cube(size=[1.5875, 10, 4.7625]);
|
||||
}
|
||||
}
|
||||
|
||||
// Body
|
||||
difference () {
|
||||
translate(v=[45, 28.5, 9 + 0.5125]) {
|
||||
cube(size=[77.7875, 23.01875, 5.7625 - 0.5125]);
|
||||
}
|
||||
|
||||
|
||||
// Cut aways
|
||||
translate(v=[45, 22, 0]) {
|
||||
rotate(a=[0,0,45]){
|
||||
translate(v=[-.25, -.25, 9]) {
|
||||
cube(size=[9.7525, 9.7525, 10]);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
translate(v=[45+ 77.7875, 22, 0]) {
|
||||
rotate(a=[0,0,45]){
|
||||
translate(v=[-.25, -.25, 9]) {
|
||||
cube(size=[9.7525, 9.7525, 10]);
|
||||
}
|
||||
}
|
||||
}
|
||||
// Screw holes
|
||||
translate(v=[54, 40, -10]) {
|
||||
cylinder(h=65, r1=1.65, r2=1.65, $fn=25);
|
||||
}
|
||||
|
||||
translate(v=[54+60.325, 40, -10]) {
|
||||
cylinder(h=65, r1=1.65, r2=1.65, $fn=25);
|
||||
}
|
||||
translate(v=[54+60.325, 40, 12]) {
|
||||
cylinder(h=65, r1=3.25, r2=3.25, $fn=6);
|
||||
}
|
||||
translate(v=[54, 40, 12]) {
|
||||
cylinder(h=65, r1=3.25, r2=3.25, $fn=6);
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user