refactor

profiles/sbc/rockpro/case.scad

@@ -0,0 +1,197 @@
+// test for screw tolerances
+
+include <./rockpro.scad>;
+
+include <../power/src/base.scad>;
+$fn = 128;
+outerD = 4.65;
+
+innerD = 2.93;
+
+
+module caseOuter() {
+    rotate(a=[90,0,0])
+    minkowski() {
+        cube(size=[80,40,195], center=true);
+        cylinder(h=0.00000000001, r=10);
+    }
+}
+
+module caseInner() {
+    translate(v=[0,0,2])
+    rotate(a=[90,0,0])
+    minkowski() {
+        cube(size=[81.5,47,195+0.01], center=true);
+        *cylinder(h=0.00000000001, r=5);
+    }
+}
+
+
+module hgill(i) {
+  minkowski() {
+    *sphere(r=2);
+              translate(v=[0,i*10,5])
+              rotate(a=[30,0,0])
+              cube(size=[200, 4, 30], center=true);
+          }
+    }
+
+module caseShell() {
+    difference() {
+        caseOuter();
+
+        union() {
+          caseInner();
+
+          // side perforations
+          for (i=[-7:7]) {
+              hgill(i=i);
+          }
+
+          // top perforations
+          for (i=[-3:3]) {
+            translate(v=[0,i*20,50])
+            cube(size=[75,10,60], center=true);
+          }
+
+          // bottom perforations
+          for (i=[2:4]) {
+            translate(v=[0,i*20,-20])
+            cube(size=[60,8,50], center=true);
+          }
+
+          for (i=[-4:0]) {
+            translate(v=[0,i*20,-20])
+            cube(size=[60,8,50], center=true);
+          }
+          
+        }
+    }
+}
+
+
+module faceMountDiffs() {
+translate(v=[45,0,20])
+rotate(a=[90,0,0])
+cylinder(r=innerD/2,h=300, center=true);
+
+translate(v=[45,0,-20])
+rotate(a=[90,0,0])
+cylinder(r=innerD/2,h=300, center=true);
+
+translate(v=[-45,0,-20])
+rotate(a=[90,0,0])
+cylinder(r=innerD/2,h=300, center=true);
+
+translate(v=[-45,0,20])
+rotate(a=[90,0,0])
+cylinder(r=innerD/2,h=300, center=true);
+}
+
+
+module caseWithMountHoles() {
+  difference() {
+
+    union() {
+      caseShell();
+
+      translate(v=[-35, 25,-27.5])
+      rotate(a=[0,0,-90])
+      rockProMountPoints(6, 3.8, 64, false);
+    }
+
+    union() {
+      translate(v=[-35, 25,-27.5])
+      rotate(a=[0,0,-90])
+      rockProMountPoints(6, innerD/2, 64, false);
+
+      faceMountDiffs();
+    }
+  }
+}
+
+*caseWithMountHoles();
+
+
+module bottomTray() {
+difference() {
+
+union() {
+intersection() {
+  caseWithMountHoles();
+  translate(v=[0,0,-115])
+  cube(size=[500,500,200], center=true);
+}
+
+translate(v=[-45.5,0,-15])
+rotate(a=[90,90,0])
+joinTriangle(185);
+
+translate(v=[45.5,0,-15])
+rotate(a=[90,90,0])
+joinTriangle(185);
+}
+
+  // bottom lugs
+  union() {
+    translate(v=[-40,-90,-29])
+    cube(size=[10.2,10.2,2.5], center=true);
+
+    translate(v=[40,-90,-29])
+    cube(size=[10.2,10.2,2.5],center=true);
+
+    translate(v=[40,90,-29])
+    cube(size=[10.2,10.2,2.5],center=true);
+
+    translate(v=[-40,90,-29])
+    cube(size=[10.2,10.2,2.5],center=true);
+  }
+}
+}
+
+
+module topTray() {
+  difference () {
+    union() {
+      difference() {
+        caseWithMountHoles();
+        translate(v=[0,0,-115])
+          cube(size=[500,500,200], center=true);
+      }
+    }
+    // bottom lugs
+    union() {
+      translate(v=[-40,-90,29])
+        cube(size=[10.2,10.2,2.5], center=true);
+
+      translate(v=[40,-90,29])
+        cube(size=[10.2,10.2,2.5],center=true);
+
+      translate(v=[40,90,29])
+        cube(size=[10.2,10.2,2.5],center=true);
+
+      translate(v=[-40,90,29])
+        cube(size=[10.2,10.2,2.5],center=true);
+
+      
+      
+      translate(v=[-45.5,0,-15])
+        rotate(a=[90,90,0])
+        scale(v=[1,0.9,1])
+        joinTriangle(300);
+
+      translate(v=[45.5,0,-15])
+        rotate(a=[90,90,0])
+        scale(v=[1,0.9,1])
+        joinTriangle(300);
+    }
+  }
+}
+
+topTray();
+
+// TODO make sure rail works!!!
+
+
+scale(v=[1,0.9,1])
+*joinTriangle(10);

profiles/sbc/rockpro/dual-tray-plate-part.scad

@@ -0,0 +1,125 @@
+include <../rack-tray/rack-tray.scad>
+include <../common.scad>
+include <../rack/screws.scad>
+include <./rockpro.scad>
+
+vU = 3;
+uHeight = 10;
+
+plateScrewDiffV = uHeight*vU;
+plateScrewDiffH = 180;
+
+plateScrewToHEdge = 4.5;
+plateScrewToVEdge = 5.5;
+
+frontPlateThickness = 3;
+
+frontPlateV = plateScrewDiffV + 2*plateScrewToHEdge;
+frontPlateH = plateScrewDiffH + 2*plateScrewToVEdge;
+
+
+plateScrewToBoxMin = 6;
+
+module _frontPlateBody() {
+    translate(v=[-plateScrewToVEdge,0,-plateScrewToHEdge])
+        cube(size=[frontPlateH,frontPlateThickness,frontPlateV]);
+}
+
+module _plateHole() {
+    rotate(a=[90,0,0])
+        cylinder(r=m4RadiusSlacked, h=inf, center=true);
+}
+
+
+module frontPlate() {
+
+    difference() {
+        _frontPlateBody();
+
+        union() {
+            // TODO: introduce helper modules for this pattern
+            _plateHole();
+
+            translate(v=[plateScrewDiffH,0,0])
+                _plateHole();
+
+            translate(v=[0,0,plateScrewDiffV])
+                _plateHole();
+
+            translate(v=[plateScrewDiffH,0,plateScrewDiffV])
+                _plateHole();
+        }
+    }
+}
+
+difference() {
+    frontPlate();
+    union() {
+        translate(v = [13, 0, - 10])
+            cube(size = [300, 100, 100]);
+
+        translate(v=[6,0,0])
+            cube(size=[5,5,5]);
+
+        translate(v=[6,0,20])
+            cube(size=[5,5,5]);
+    }
+}
+
+
+
+// todo use library constants
+module screwRiser(height) {
+    difference() {
+        cylinder(d=5, h=height, $fn=64);
+        cylinder(d=2.88, h=height, $fn=64);
+    }
+}
+
+module mountPoints_N(cylHeight, cylRad1, cylRad2, cylFn, center) {
+    for (i=[0:3]) {
+        p = mountPoints[i];
+        translate(v=[p[0], p[1], p[2]])
+            cylinder(r1=cylRad1, r2=cylRad2, h=cylHeight, $fn=cylFn, center=center);
+    }
+
+}
+
+module rockProScrewMounts() {
+    for (i=[0:3]) {
+        p = mountPoints[i];
+        translate(v=[p[0], p[1], p[2]])
+            screwRiser(5);
+    }
+}
+
+
+module rockProDualTray() {
+
+
+    trayBody();
+    translate(v=[9,8,trayBottomThickness])
+        rockProScrewMounts();
+
+    translate(v=[9 + pcbDimensions[0],8,trayBottomThickness])
+        rockProScrewMounts();
+
+}
+
+*difference() {
+    rockProDualTray();
+    // file specific bottom holes
+    union() {
+        translate(v = [10, 15, 0])
+            minkowski() {
+                cube(size = [69, 100, 5]);
+                cylinder(r = 1);
+            }
+
+        translate(v=[88,15,0])
+            minkowski() {
+                cube(size = [69, 100, 5]);
+                cylinder(r=1);
+            }
+    }
+}

profiles/sbc/rockpro/dual-tray.scad

@@ -0,0 +1,125 @@
+include <../rack-tray/rack-tray.scad>
+include <../common.scad>
+include <../rack/screws.scad>
+include <./rockpro.scad>
+
+vU = 3;
+uHeight = 10;
+
+plateScrewDiffV = uHeight*vU;
+plateScrewDiffH = 180;
+
+plateScrewToHEdge = 4.5;
+plateScrewToVEdge = 5.5;
+
+frontPlateThickness = 2;
+
+frontPlateV = plateScrewDiffV + 2*plateScrewToHEdge;
+frontPlateH = plateScrewDiffH + 2*plateScrewToVEdge;
+
+
+plateScrewToBoxMin = 6;
+
+module _frontPlateBody() {
+    translate(v=[-plateScrewToVEdge,0,-plateScrewToHEdge])
+        cube(size=[frontPlateH,frontPlateThickness,frontPlateV]);
+}
+
+module _plateHole() {
+    rotate(a=[90,0,0])
+        cylinder(r=m4RadiusSlacked, h=inf, center=true);
+}
+
+
+module frontPlate() {
+
+    difference() {
+        _frontPlateBody();
+
+        union() {
+            // TODO: introduce helper modules for this pattern
+            _plateHole();
+
+            translate(v=[plateScrewDiffH,0,0])
+                _plateHole();
+
+            translate(v=[0,0,plateScrewDiffV])
+                _plateHole();
+
+            translate(v=[plateScrewDiffH,0,plateScrewDiffV])
+                _plateHole();
+        }
+    }
+}
+
+difference() {
+    frontPlate();
+    union() {
+        translate(v = [13, 0, - 10])
+            cube(size = [300, 100, 100]);
+
+        translate(v=[6,0,-2])
+            cube(size=[5.5,5.5,5.5]);
+
+        translate(v=[6,0,20-2])
+            cube(size=[5.5,5.5,5.5]);
+    }
+}
+
+
+
+// todo use library constants
+// TODO these risers are prone to snapping off
+module screwRiser(height) {
+    difference() {
+        cylinder(d=5, h=height, $fn=64);
+        cylinder(d=2.88, h=height, $fn=64);
+    }
+}
+
+module mountPoints_N(cylHeight, cylRad1, cylRad2, cylFn, center) {
+    for (i=[0:3]) {
+        p = mountPoints[i];
+        translate(v=[p[0], p[1], p[2]])
+            cylinder(r1=cylRad1, r2=cylRad2, h=cylHeight, $fn=cylFn, center=center);
+    }
+}
+
+module rockProScrewMounts() {
+    for (i=[0:3]) {
+        p = mountPoints[i];
+        translate(v=[p[0], p[1], p[2]])
+            screwRiser(5);
+    }
+}
+
+
+module rockProDualTray() {
+
+
+    trayBody();
+    translate(v=[9,8,trayBottomThickness])
+        rockProScrewMounts();
+
+    translate(v=[9 + pcbDimensions[0],8,trayBottomThickness])
+        rockProScrewMounts();
+
+}
+
+*difference() {
+    rockProDualTray();
+    // file specific bottom holes
+    union() {
+        translate(v = [10, 15, 0])
+            minkowski() {
+                cube(size = [69, 100, 5]);
+                cylinder(r = 1);
+            }
+
+        translate(v=[88,15,0])
+            minkowski() {
+                cube(size = [69, 100, 5]);
+                cylinder(r=1);
+            }
+    }
+}

profiles/sbc/rockpro/newcase.scad

@@ -0,0 +1,201 @@
+
+include <./rockpro.scad>;
+
+include <../power/src/base.scad>;
+$fn = 128;
+outerD = 4.65;
+
+innerD = 2.93;
+
+
+
+
+
+module caseOuter() {
+    rotate(a=[90,0,0])
+    minkowski() {
+        //translate(v=[-35, -15, -32.5])
+        cube(size=[70,30,130], center=true);
+        cylinder(h=0.00000000001, r=15);
+    }
+}
+
+module caseInner() {
+    translate(v=[0,0,0])
+    rotate(a=[90,0,0])
+    minkowski() {
+        cube(size=[70,30,130+0.01], center=true);
+        cylinder(h=0.00000000001, r=12);
+    }
+}
+
+module hgill(i) {
+  minkowski() {
+    *sphere(r=2);
+              translate(v=[0,i*10,5])
+              rotate(a=[30,0,0])
+              cube(size=[200, 4, 30], center=true);
+          }
+    }
+
+module caseShell() {
+
+  union() {
+    
+
+    
+    difference() {
+      caseOuter();
+
+      union() {
+        caseInner();
+
+        // side perforations
+        for (i=[-7:7]) {
+          *hgill(i=i);
+        }
+
+        // top perforations
+        for (i=[-2:2]) {
+          translate(v=[0,i*20,50])
+            cube(size=[50,8,50], center=true);
+        }
+
+        for (i=[-2:2]) {
+          translate(v=[0,i*20,-20])
+            rotate(a=[0,0,25])
+            cube(size=[50,3,50], center=true);
+        }
+          
+      }
+    }
+  }
+}
+
+module caseWithMountHoles() {
+  difference() {
+
+    union() {
+      caseShell();
+
+      translate(v=[-35, 59,-28])
+      rotate(a=[0,0,-90])
+      rockProMountPoints(5.0, 5.5, 2.5, 64, false);
+      faceMountSupports();
+    }
+
+    union() {
+      translate(v=[-35, 59,-29.5])
+      rotate(a=[0,0,-90])
+      rockProMountPoints(6.5, innerD/2, innerD/2, 64, false);
+
+      faceMountDiffs();
+    }
+  }
+}
+
+module guideRail(x,y,z) {
+  // gross
+  cube(size=[y,z,x]);
+}
+
+
+module faceMountDiffs() {
+
+  for (i = [-1,1]) {
+    for (j = [-1,1]) {
+      translate(v=[i*47,0,j*15]) {                  
+
+        rotate(a=[90,0,0])
+          translate(v=[0,0,93])
+          *cylinder(r=innerD/2,h=12, center=true);
+          
+        rotate(a=[90,0,0])
+          translate(v=[0,0,-93])
+          *cylinder(r=innerD/2,h=12, center=true);
+
+                  
+          rotate(a=[90,0,0])
+          translate(v=[0,0,90])
+          cylinder(r=innerD/2,h=400, center=true);
+      }
+
+    }
+  }
+}
+
+module faceMountSupports() {
+
+  intersection() {
+    caseOuter();
+    for (i = [-1,1]) {
+      for (j = [-1,1]) {
+        translate(v=[i*47,0,j*15]) {
+
+          
+          rotate(a=[90,0,0])
+          translate(v=[0,0,90])
+          cylinder(r=innerD,h=400, center=true);
+
+        }
+      }
+    }
+  }
+}
+
+module bottomTray() {
+difference() {
+
+union() {
+  translate(v=[-48,0,-11])
+  cube(size=[4,130,4], center=true);
+
+  translate(v=[48,0,-11])
+  cube(size=[4,130,4], center=true);
+intersection() {
+  caseWithMountHoles();
+  translate(v=[0,0,-110])
+  cube(size=[500,500,200], center=true);
+}
+
+
+
+translate(v=[-50,65,-10+3])
+rotate(a=[90,90,0])
+guideRail(130,2,2);
+
+
+translate(v=[48, 65, -10+3])
+rotate(a=[90,90,0])
+guideRail(130,2,2);
+
+
+}
+
+// bottom lugs
+  union() {
+    translate(v=[-35,-56.5,-30])
+    *cube(size=[10.2,10.2,2.5], center=true);
+
+    translate(v=[35,-56.5,-30])
+    *cube(size=[10.2,10.2,2.5],center=true);
+
+    translate(v=[35,56.5,-30])
+    *cube(size=[10.2,10.2,2.5],center=true);
+
+    translate(v=[-35,56.5,-30])
+    *cube(size=[10.2,10.2,2.5],center=true);
+  }
+
+
+}
+
+}
+
+
+
+bottomTray();
+*caseWithMountHoles();
+
+
+*caseShell();

profiles/sbc/rockpro/railTest.stl

@@ -0,0 +1,198 @@
+solid OpenSCAD_Model
+  facet normal -1 0 0
+    outer loop
+      vertex 0 2.41621 -5
+      vertex 0 4.05 5
+      vertex 0 4.05 -5
+    endloop
+  endfacet
+  facet normal -1 -0 0
+    outer loop
+      vertex 0 4.05 5
+      vertex 0 2.41621 -5
+      vertex 0 2.41621 5
+    endloop
+  endfacet
+  facet normal -1 0 0
+    outer loop
+      vertex 0 -4.05 -5
+      vertex 0 -2.41621 5
+      vertex 0 -2.41621 -5
+    endloop
+  endfacet
+  facet normal -1 -0 0
+    outer loop
+      vertex 0 -2.41621 5
+      vertex 0 -4.05 -5
+      vertex 0 -4.05 5
+    endloop
+  endfacet
+  facet normal -1 0 0
+    outer loop
+      vertex -2.325 -3.62432 -5
+      vertex -2.325 3.62432 5
+      vertex -2.325 3.62432 -5
+    endloop
+  endfacet
+  facet normal -1 -0 0
+    outer loop
+      vertex -2.325 3.62432 5
+      vertex -2.325 -3.62432 -5
+      vertex -2.325 -3.62432 5
+    endloop
+  endfacet
+  facet normal 0.461085 0.887356 -0
+    outer loop
+      vertex 0 2.41621 -5
+      vertex -2.325 3.62432 5
+      vertex 0 2.41621 5
+    endloop
+  endfacet
+  facet normal 0.461085 0.887356 0
+    outer loop
+      vertex -2.325 3.62432 5
+      vertex 0 2.41621 -5
+      vertex -2.325 3.62432 -5
+    endloop
+  endfacet
+  facet normal 0.461085 -0.887356 0
+    outer loop
+      vertex -2.325 -3.62432 -5
+      vertex 0 -2.41621 5
+      vertex -2.325 -3.62432 5
+    endloop
+  endfacet
+  facet normal 0.461085 -0.887356 0
+    outer loop
+      vertex 0 -2.41621 5
+      vertex -2.325 -3.62432 -5
+      vertex 0 -2.41621 -5
+    endloop
+  endfacet
+  facet normal 1 -0 0
+    outer loop
+      vertex 3.5 -4.05 5
+      vertex 3.5 4.05 -5
+      vertex 3.5 4.05 5
+    endloop
+  endfacet
+  facet normal 1 0 0
+    outer loop
+      vertex 3.5 4.05 -5
+      vertex 3.5 -4.05 5
+      vertex 3.5 -4.05 -5
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex -2.325 3.62432 5
+      vertex 0 -2.41621 5
+      vertex 0 2.41621 5
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex 0 -2.41621 5
+      vertex -2.325 3.62432 5
+      vertex -2.325 -3.62432 5
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex 0 2.41621 5
+      vertex 3.5 4.05 5
+      vertex 0 4.05 5
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex 3.5 4.05 5
+      vertex 0 2.41621 5
+      vertex 3.5 -4.05 5
+    endloop
+  endfacet
+  facet normal -0 0 1
+    outer loop
+      vertex 0 -2.41621 5
+      vertex 3.5 -4.05 5
+      vertex 0 2.41621 5
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex 3.5 -4.05 5
+      vertex 0 -2.41621 5
+      vertex 0 -4.05 5
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex -2.325 -3.62432 -5
+      vertex 0 2.41621 -5
+      vertex 0 -2.41621 -5
+    endloop
+  endfacet
+  facet normal -0 0 -1
+    outer loop
+      vertex 0 2.41621 -5
+      vertex -2.325 -3.62432 -5
+      vertex -2.325 3.62432 -5
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex 0 -2.41621 -5
+      vertex 3.5 -4.05 -5
+      vertex 0 -4.05 -5
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex 3.5 -4.05 -5
+      vertex 0 -2.41621 -5
+      vertex 3.5 4.05 -5
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex 0 2.41621 -5
+      vertex 3.5 4.05 -5
+      vertex 0 -2.41621 -5
+    endloop
+  endfacet
+  facet normal -0 0 -1
+    outer loop
+      vertex 3.5 4.05 -5
+      vertex 0 2.41621 -5
+      vertex 0 4.05 -5
+    endloop
+  endfacet
+  facet normal 0 1 -0
+    outer loop
+      vertex 3.5 4.05 -5
+      vertex 0 4.05 5
+      vertex 3.5 4.05 5
+    endloop
+  endfacet
+  facet normal 0 1 0
+    outer loop
+      vertex 0 4.05 5
+      vertex 3.5 4.05 -5
+      vertex 0 4.05 -5
+    endloop
+  endfacet
+  facet normal 0 -1 0
+    outer loop
+      vertex 0 -4.05 -5
+      vertex 3.5 -4.05 5
+      vertex 0 -4.05 5
+    endloop
+  endfacet
+  facet normal 0 -1 -0
+    outer loop
+      vertex 3.5 -4.05 5
+      vertex 0 -4.05 -5
+      vertex 3.5 -4.05 -5
+    endloop
+  endfacet
+endsolid OpenSCAD_Model

profiles/sbc/rockpro/rockpro.scad

@@ -0,0 +1,65 @@
+include <../common.scad>
+
+// All coordinates are in [x,y], or [x,y,z] format
+
+pcbDimensions = [79.41, 127.06]; // [x,y]
+pcbThickness = 1.22;
+
+// TODO move mount points
+mountPoints = [[0,0,0], [0,118,0], [71.0,118, 0], [71.0,0,0]];
+
+module mountPoints_N(cylHeight, cylRad1, cylRad2, cylFn, center) {
+  for (i=[0:3]) {
+    p = mountPoints[i];
+    translate(v=[p[0], p[1], p[2]])
+    cylinder(r1=cylRad1, r2=cylRad2, h=cylHeight, $fn=cylFn, center=center);
+  }
+  
+}
+
+module pcb() {
+  cube(size=[pcbDimensions[0], pcbDimensions[1], pcbThickness]);
+}
+
+// defined on x-z plane, start at top of pcb
+module frontFaceIOCutouts_N() {
+  translate(v=[9,0,0])
+    cube(size=[26.0,inf50,7.5]);
+
+  translate(v=[35,0,0])
+    cube(size=[35,inf50,17.9]);
+}
+module backFaceIOCutouts_N() {
+  translate(v=[9,0,0])
+    cube(size=[61,inf50,14]);
+}
+
+
+module cutoutProfile_N() {
+
+  color([1,0,1])
+  union() {
+  mirror(v=[0,1,0])
+    translate(v=[0,-1,pcbThickness])
+    frontFaceIOCutouts_N();
+
+  translate(v=[0,pcbDimensions[1]-1, pcbThickness])
+  backFaceIOCutouts_N();
+  }
+
+  color([0.3,0.8,0.1])
+  difference() {
+    pcb();
+    translate(v=[3.75, 3.75])
+      mountPoints_N(10,2,2,10,true);
+  }
+}
+
+//cutoutProfile_N();
+
+
+//mountPoints_N(10,2,2, true);
+
+
+
+

profiles/sbc/rpi/frontPlate.scad

@@ -0,0 +1,129 @@
+include <../common.scad>
+include <../rack/screws.scad>
+include <../sinusoid.scad>
+
+vU = 2;
+uHeight = 10;
+
+plateScrewDiffV = uHeight*vU;
+plateScrewDiffH = 180;
+
+plateScrewToHEdge = 4.5;
+plateScrewToVEdge = 5.5;
+
+frontPlateThickness = 2.5;
+
+frontPlateV = plateScrewDiffV + 2*plateScrewToHEdge;
+frontPlateH = plateScrewDiffH + 2*plateScrewToVEdge;
+
+
+plateScrewToBoxMin = 6;
+
+
+length = 170;
+resolution = 250;
+period = PI/6;
+shift = 0.0;
+amplitudeFunction = function(x)  2;
+
+module _frontPlateBody() {
+
+    difference() {
+        translate(v = [- plateScrewToVEdge, 0, - plateScrewToHEdge])
+            cube(size = [frontPlateH, frontPlateThickness, frontPlateV]);
+    }
+
+    translate(v=[5,-3,-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.02, 2, 5);
+
+    translate(v=[5,-3,4-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period, 2 , 5);
+
+    translate(v=[5,-3,8-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.03, 2.5, 5);
+
+    translate(v=[5,-3,12-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.1, 3.3, 5);
+
+    translate(v=[5,-3,16-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.1, 5, 5);
+
+    translate(v=[5,-3,20-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.1, 6, 5);
+
+    translate(v=[5,-3,24-1])
+        rotate(a=[180,0,0])
+            sineWaveHull(length, resolution, amplitudeFunction, period+0.08, 7, 5);
+}
+
+module _plateHole() {
+    rotate(a=[90,0,0])
+        cylinder(r=m4RadiusSlacked, h=inf, center=true);
+}
+
+
+module frontPlate() {
+
+    difference() {
+        _frontPlateBody();
+
+        union() {
+            // TODO: introduce helper modules for this pattern
+            _plateHole();
+
+            translate(v=[plateScrewDiffH,0,0])
+                _plateHole();
+
+            translate(v=[0,0,plateScrewDiffV])
+                _plateHole();
+
+            translate(v=[plateScrewDiffH,0,plateScrewDiffV])
+                _plateHole();
+
+        }
+    }
+}
+
+difference() {
+difference() {
+
+    difference() {
+        union() {
+            rotate(a = [- 90, 0, 0])
+                frontPlate();
+        }
+
+        union() {
+            translate(v=[1,0,0])
+                rotate(a=[0,-15, 0])
+                    translate(v=[0,-50,0])
+                        cube(size=[100, 100, 30]);
+
+            translate(v=[180-1,0,0])
+                mirror(v=[1,0,0]) {
+                    rotate(a = [0, - 15, 0])
+                        translate(v = [0, - 50, 0])
+                            cube(size = [100, 100, 30]);
+                }
+        }
+
+    }
+    // lug holes
+    union() {
+        translate(v=[160,-3,-frontPlateThickness])
+            cube(size=[5.2, 5.2, 3]);
+        translate(v=[160-91.1,-3,-frontPlateThickness])
+            cube(size=[5.2, 5.2, 3]);
+    }
+}
+    for (i=[0:5]) {
+        translate(v=[5,i*4 - 0.75,-10])
+        cube(size=[170, 1.5, 20]);
+    }
+}

profiles/sbc/rpi/rpi2b.scad

@@ -0,0 +1,148 @@
+/*
+TODO this case has many many problems as it currently is. The following
+ should be addressed before it is printed again:
+  - risers are made of plastic and really easily break
+  - no locking lid for case
+*/
+
+include <../common.scad>
+
+// All coordinates are in [x,y], or [x,y,z] format
+
+pcbDimensions = [56.0, 85.1]; // [x,y]
+pcbThickness = 1.42;
+
+
+// [+x, -x, +y, -y]
+pcbCaseSpace = [5, 2, 5, 2];
+
+pcbRise = 3;
+caseWallThickness = 2;
+caseBottomThickness = 2;
+
+
+mountPointDiameter = 5;
+mountPoints = [[3.65,23.30,0], [3.65,pcbDimensions[1]-3.65,0], [pcbDimensions[0]-3.65,23.30,0], [pcbDimensions[0]-3.65,pcbDimensions[1]-3.65,0]];
+
+module pcb() {
+  cube(size=[pcbDimensions[0], pcbDimensions[1], pcbThickness]);
+}
+
+module pcbCaseBottom_() {
+  translate(v=[-pcbCaseSpace[1]-caseWallThickness, -pcbCaseSpace[3]-caseWallThickness, -caseBottomThickness-pcbRise])
+  difference() {
+    cube(size=[
+           pcbDimensions[0]+pcbCaseSpace[0]+pcbCaseSpace[1] + 2*caseWallThickness,
+           pcbDimensions[1]+pcbCaseSpace[2]+pcbCaseSpace[3] + 2*caseWallThickness,
+           26 // 3u case, subtracted for and other bullshit
+           ]);
+    translate(v=[caseWallThickness, caseWallThickness, caseBottomThickness])
+    cube(size=[
+           pcbDimensions[0]+pcbCaseSpace[0]+pcbCaseSpace[1],
+           pcbDimensions[1]+pcbCaseSpace[2]+pcbCaseSpace[3],
+           26 // 3u case, subtracted 4 for lid and bullshit
+           ]);
+  }
+}
+
+module pcbCaseWithRisers_() {
+  union() {
+    translate(v=[0,0,-pcbRise]){
+
+      difference () {
+        mountPoints_N(pcbRise, mountPointDiameter/1.5, mountPointDiameter/2, 32, false);
+        mountPoints_N(pcbRise + 2, 1.95/2 - 0.05, 1.95/2 - 0.05, 32, false);
+      }
+    }
+    pcbCaseBottom_();
+  }
+}
+
+
+module cutoutProfileAirflow_N() {
+
+  // bottom cutouts
+  union() {
+    for (i=[0:11]) {
+      translate(v=[pcbDimensions[0]/2.0, i*6 + 10,0])
+        minkowski() {
+        cube(size=[30,1,20], center=true);
+        cylinder(h=1,r=1);
+      }
+    }
+  }
+
+  // back cutout
+  translate(v=[5,pcbDimensions[1]+5,-1])
+    minkowski() {
+      cube(size=[50,90,15], center=false);
+      rotate(a=[90,0,0])
+        cylinder(h=1,r=2);
+  }
+
+  // front cutout
+  translate(v=[pcbDimensions[0],2.5,1])
+  cube(size=[inf50, 80, 15]);
+}
+
+difference() {
+
+  union() {
+  pcbCaseWithRisers_();
+
+    // lugs
+    // -4
+    translate(v=[pcbDimensions[0]+caseWallThickness+pcbCaseSpace[0],-caseWallThickness-pcbCaseSpace[3],-pcbRise-caseBottomThickness])
+      cube(size=[2,5,5]);
+
+    // 87.1
+    translate(v=[pcbDimensions[0]+caseWallThickness+pcbCaseSpace[0],pcbDimensions[1]+pcbCaseSpace[2]-5+caseWallThickness,-pcbRise-caseBottomThickness])
+      cube(size=[2,5,5]);
+
+    // -> 87.1 + 4 = 91.1
+  }
+
+  union() {
+    cutoutProfile_N();
+    cutoutProfileAirflow_N();
+  }
+}
+//cutoutProfileAirflow_N();
+
+module mountPoints_N(cylHeight, cylRad1, cylRad2, cylFn, center) {
+  for (i=[0:3]) {
+    p = mountPoints[i];
+    translate(v=[p[0], p[1], p[2]])
+    cylinder(r1=cylRad1, r2=cylRad2, h=cylHeight, $fn=cylFn, center=center);
+  }
+  
+}
+
+
+*difference() {
+  union () {
+    pcb();
+    mountPoints_N(7, mountPointDiameter/2.5, mountPointDiameter/2.5, 32, false);
+    mountPoints_N(5, mountPointDiameter, mountPointDiameter, 32, false);
+  }
+}
+
+// fucked up
+module cutoutProfile_N() {
+  color([1,0,1])
+    union() {
+    // front I/O
+    mirror(v=[0,1,0])
+      translate(v=[1, -eps*100, pcbThickness-4])
+      cube(size=[58.0 + 0.1, inf50,  19.0 + 0.1]);
+
+    // side I/O
+    translate(v=[-48-3, (pcbDimensions[1]-54)-10, pcbThickness-4])
+    cube(size=[inf50, 64, 19]);
+  }
+
+}
+
+*cutoutProfile_N();
+//pcb();
+

profiles/sbc/rpi/top.scad

@@ -0,0 +1,22 @@
+
+
+difference() {
+  union() {
+    cube(size=[67,95.7,1]);
+    translate(v=[2,2,1])
+    cube(size=[63.2,92,3]);
+  }
+
+  union() {
+    translate(v=[3.5, 3.8,1])
+      cube(size=[60,88,3]);
+
+    for(i=[0:7]) {
+      translate(v=[33.5,i*10 + 12,0])
+      minkowski() {
+        cylinder(h=1,r=1);
+        cube(size=[50,5,10], center=true);
+      }
+    }
+  }
+}

profiles/sbc/rpi/voronoi.scad

@@ -0,0 +1,95 @@
+
+// (c)2013 Felipe Sanches <juca@members.fsf.org>
+// licensed under the terms of the GNU GPL version 3 (or later)
+
+function normalize(v) = v / (sqrt(v[0] * v[0] + v[1] * v[1]));
+
+//
+// The voronoi() function generates a 2D surface, which can be provided to
+// a) linear_extrude() to produce a 3D object
+// b) intersection() to restrict it to a a specified shape -- see voronoi_polygon.scad
+//
+// Parameters:
+//   points (required) ... nuclei coordinates (array of [x, y] pairs)
+//   L                 ... the radius of the "world" (the pattern is built within this circle)
+//   thickness         ... the thickness of the lines between cells
+//   round             ... the radius applied to corners (fillet in CAD terms)
+//   nuclei (bool)     ... show nuclei sites
+//
+// These parameters need to be kept more or less in proportion to each other, and to the distance
+// apart of points in the point_set. If one or the other parameter is increased or decreased too
+// much, you'll get no output.
+//
+module voronoi(points, L = 200, thickness = 1, round = 6, nuclei = true) {
+	for (p = points) {
+		difference() {
+			minkowski() {
+				intersection_for(p1 = points){
+					if (p != p1) {
+						angle = 90 + atan2(p[1] - p1[1], p[0] - p1[0]);
+
+						translate((p + p1) / 2 - normalize(p1 - p) * (thickness + round))
+						rotate([0, 0, angle])
+						translate([-L, -L])
+						square([2 * L, L]);
+					}
+				}
+				circle(r = round, $fn = 20);
+			}
+			if (nuclei)
+				translate(p) circle(r = 1, $fn = 20);
+		}
+	}
+}
+
+//
+// The random_voronoi() function is the helper wrapper over the voronoi() core.
+// It generates random nuclei site coordinates into the square area,
+// passing other arguments to voronoi() unchanged.
+//
+// Parameters:
+//   n                 ... number of nuclei sites to be generated
+//   nuclei (bool)     ... show nuclei sites
+//   L                 ... the radius of the "world" (the pattern is built within this circle)
+//   thickness         ... the thickness of the lines between cells
+//   round             ... the radius applied to corners (fillet in CAD terms)
+//   min               ... minimum x and y coordinate for nuclei generation
+//   max               ... maximum x and y coordinate for nuclei generation
+//   seed              ... seed for the random generator (random if undefined)
+//   center (bool)     ... move resulting pattern to [0, 0] if true
+//
+module random_voronoi(n = 20, nuclei = true, L = 200, thickness = 1, round = 6, min = 0, max = 100, seed = undef, center = false) {
+	seed = seed == undef ? rands(0, 100, 1)[0] : seed;
+	echo("Seed", seed);
+
+	// Generate points.
+	x = rands(min, max, n, seed);
+	y = rands(min, max, n, seed + 1);
+	points = [ for (i = [0 : n - 1]) [x[i], y[i]] ];
+        
+	// Center Voronoi.
+	offset_x = center ? -(max(x) - min(x)) / 2 : 0;
+	offset_y = center ? -(max(y) - min(y)) / 2 : 0;
+	translate([offset_x, offset_y])
+    
+	voronoi(points, L = L, thickness = thickness, round = round, nuclei = nuclei);
+}
+
+// example with an explicit list of points:
+point_set = [
+	[0, 0], [30, 0], [20, 10], [50, 20], [15, 30], [85, 30], [35, 30], [12, 60],
+	[45, 50], [80, 80], [20, -40], [-20, 20], [-15, 10], [-15, 50]
+];
+//voronoi(points = point_set, round = 4, nuclei = true);
+
+module voronoi3u_N(h) {
+  intersection() {
+    translate(v=[10,5,0])
+      cube(size=[160, 10, h]);
+    translate(v=[20,-52,0])
+      scale(v=[0.40,0.44,10])
+      linear_extrude(height=10)
+      random_voronoi(n = 128, round = 2, min = 0, max = 350, seed = 40, thickness=3.5, nuclei=false);
+  }
+}
+