add profiles.scad

rack/config.scad

@@ -6,32 +6,39 @@
    - "_N" appended to a module is meant to denote that this module is a negative volume, and should only be used to
      substract from other volumes. "_P" is meant to denote a positive value. Modules are positive by default.
 */
+include <./profiles.scad>
+
+profile = "default";
+
+echo("Profile:", profile);
 
 // Maximum width for rackmount units. Change this according your max expected enclosure width.
 // Changing this will directly affect the required build volume.
-maxUnitWidth = 200;
+maxUnitWidth = getConfigValue(profile, "maxUnitWidth");
 
 // Maximum (recommended) unit depth. There technically isn't a max unit depth because there's no physical bound on
 // how far a rack unit can extrude back. This parameter basically controls the distance between the front of the front
 // rails and the back of the back rails. Changing this will directly affect the required build volume.
-maxUnitDepth = 200;
+maxUnitDepth = getConfig("maxUnitDepth");
 
 // Vertical distance between the midpoint of adjacent screws mounts. Affects build volume.
-screwDiff = 10;
+screwDiff = getConfig("screwDiff");
 
 // Number screw slots on the main rail. Affects build volume.
-numRailScrews = 20;
+numRailScrews = getConfig("numRailScrews");
 
 // Screw type used for rackmount units. See screws.scad.
-mainRailScrewType = "m4";
+mainRailScrewType = getConfig("mainRailScrewType");
 
 // Screw type used to affix side rails.
-mainRailSideMountScrewType = "m4";
+mainRailSideMountScrewType = getConfig("mainRailSideMountScrewType");
 
 // Screw type used for constructing the actual rack frame.
-rackFrameScrewType = "m3";
+rackFrameScrewType = getConfig("rackFrameScrewType");
 // Currently, only m3 screws are supported here (tolerance issues)
 assert(rackFrameScrewType == "m3");
 
 // Fillet radius for main rack profile
-baseRoundness = 5;
+baseRoundness = getConfig("baseRoundness");
+
+echo("numRailScrews", numRailScrews);