From 52e88edb890e18e2404f02c70284e651389cb8cf Mon Sep 17 00:00:00 2001 From: zhao Date: Fri, 1 Sep 2023 16:46:29 -0400 Subject: [PATCH] touch up readmes --- rack-mount/enclosed-box/README.md | 4 ++-- rack-mount/patch-panel/README.md | 2 +- rack-mount/tray/README.md | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/rack-mount/enclosed-box/README.md b/rack-mount/enclosed-box/README.md index f1ffb27..bffc74b 100644 --- a/rack-mount/enclosed-box/README.md +++ b/rack-mount/enclosed-box/README.md @@ -7,6 +7,6 @@ Please see [entry.scad](./entry.scad) for config and building. Make sure the correct rack profile is configured in [rackFrame.scad](../../config/rackFrame.scad). - This system comprises three parts: two side rails, and a front plate. -- This system is useful for mounting heavier box-shaped things. It works by first sliding in the box inside the side rails (which secures `x`, `z`, and one half of the `y` axis), and then mounting the front plate along the main rails. +- This system is useful for mounting heavier box-shaped things. It works by first sliding in the box inside the side rails (which secures `x`, `z`, and one half of the `y` axis), and then mounting the front plate along the main rails (fully securing the `y` axis). - Side rails will most likely require supports to print. -- For wider boxes (nearing the `maxUnitWidth` of the rack), you will have to set `recessSideRail` to true. This is so the side rails will not collide with the main rack rails. \ No newline at end of file +- For wider boxes (nearing the `maxUnitWidth` of the rack), you will have to set `recessSideRail` to true. This is so the side rails do not collide with the main rack rails. \ No newline at end of file diff --git a/rack-mount/patch-panel/README.md b/rack-mount/patch-panel/README.md index 320402c..ed786b0 100644 --- a/rack-mount/patch-panel/README.md +++ b/rack-mount/patch-panel/README.md @@ -5,5 +5,5 @@ Please see [entry.scad](./entry.scad) for config and building. Make sure the correct rack profile is configured in [rackFrame.scad](../../config/rackFrame.scad). -- Mount RJ-45 Keystone jacks with this part. +- Mount RJ-45 keystone jacks with this part. - Single part. Can be printed without supports. \ No newline at end of file diff --git a/rack-mount/tray/README.md b/rack-mount/tray/README.md index 02cc7d2..a14d631 100644 --- a/rack-mount/tray/README.md +++ b/rack-mount/tray/README.md @@ -5,5 +5,5 @@ Please see [entry.scad](./entry.scad) for config and building. Make sure the correct rack profile is configured in [rackFrame.scad](../../config/rackFrame.scad). - Mount on front rails. -- Single Part, can also be printed without supports. -- Includes support for custom bottom screws (`mountPoints` in config). This is useful for SBCs and mini PCs with bottom screws. \ No newline at end of file +- Single part. Can be printed without supports. +- Includes support for custom bottom screws (see `mountPoints` in config). This is useful for SBCs and mini PCs with bottom screws. \ No newline at end of file