refactor

rack2/mainRail.scad

@@ -0,0 +1,131 @@
+include <./config.scad>
+include <../math.scad>
+include <./screws.scad>
+
+/* Small horizontal planes at the top and bottom of the main rails. Used so we can fasten the rail to the frame
+   Note that this value is also used for a depression at the bottom/top of the frame for aligning the rail */
+railFootThickness = 3;
+
+railTotalHeight = screwDiff * (numRailScrews + 1) + 2 * railFootThickness;
+
+// Distance between the middle of a screw mount and the rail's vertical edges
+railScrewHoleToInnerEdge = 5;
+railScrewHoleToOuterEdge = 5;
+
+// Distance between the midpoint of the rail screw holes.
+rackMountScrewWidth = maxUnitWidth + 2 * railScrewHoleToInnerEdge;
+
+railFrontThickness = 6; // Make sure that the nuts for the chosen screw type can slot within the front face
+railSideMountThickness = 2.5;
+railOtherThickness = 2.5;
+
+// Extra spacing for screws.
+frontScrewSpacing = 8;
+
+sideSupportExtraSpace = 2;
+sideSupportScrewHoleToFrontEdge = 5;
+sideSupportScrewHoleToBackEdge = 4.5;
+sideSupportDepth = sideSupportScrewHoleToBackEdge + sideSupportScrewHoleToFrontEdge;
+
+frontFaceWidth = railScrewHoleToInnerEdge + railScrewHoleToOuterEdge;
+
+railTotalWidth = frontFaceWidth;
+railTotalDepth = railFrontThickness+railOtherThickness+frontScrewSpacing+sideSupportDepth;
+
+
+*mainRail();
+echo("Total Rail Height: ", railTotalHeight);
+
+module mainRail() {
+
+  union() {
+    _frontRailSegment();
+
+    translate(v = [0, railFrontThickness, 0])
+    _connectingLBracketRailSegment();
+
+    translate(v = [frontFaceWidth-sideSupportExtraSpace, railFrontThickness+railOtherThickness+frontScrewSpacing, 0])
+    rotate(a = [0, 0, 90])
+    _sideSupportSegment();
+
+
+    translate(v = [0, railFrontThickness + railOtherThickness + frontScrewSpacing, 0]) {
+
+      _railFeet();
+
+      translate(v = [0, 0, railTotalHeight - railFootThickness])
+      _railFeet();
+    }
+  }
+
+  module _frontRailSegment() {
+    difference() {
+      cube(size = [frontFaceWidth, railFrontThickness, railTotalHeight]);
+
+      for (i = [1:numRailScrews]) {
+        translate(v = [railScrewHoleToOuterEdge, railFrontThickness / 2, i * screwDiff + railFootThickness])
+        rotate(a = [90, 0, 0])
+        hexNutPocket_N(mainRailScrewType);
+      }
+    }
+  }
+
+  module _connectingLBracketRailSegment() {
+    difference() {
+      cube(size = [railOtherThickness, frontScrewSpacing + railOtherThickness, railTotalHeight]);
+
+      union() {
+        translate(v = [0, 4, railFootThickness + screwDiff / 2])
+        rotate(a = [0, 90, 0])
+        cylinder(r = screwRadiusSlacked(rackFrameScrewType), h = 10, $fn = 32, center = true);
+
+        translate(v = [0, 4, railTotalHeight - (railFootThickness + screwDiff / 2)])
+        rotate(a = [0, 90, 0])
+        cylinder(r = screwRadiusSlacked(rackFrameScrewType), h = inf10, $fn = 32, center = true);
+      }
+    }
+
+    translate(v = [0, frontScrewSpacing + railOtherThickness, 0])
+    rotate(a = [0, 0, 270])
+    cube(size = [railOtherThickness, frontFaceWidth - sideSupportExtraSpace, railTotalHeight]);
+  }
+
+
+  module _sideSupportSegment() {
+    difference() {
+      cube(size = [sideSupportDepth, railSideMountThickness, railTotalHeight]);
+
+      for (i = [1:numRailScrews]) {
+        translate(v = [sideSupportScrewHoleToFrontEdge, railFrontThickness / 2, i * screwDiff + railFootThickness])
+        rotate(a = [90, 0, 0])
+        cylinder(r = screwRadiusSlacked(mainRailSideMountScrewType), h = inf10, $fn = 32);
+      }
+    }
+
+  }
+
+  module _railFeet() {
+    difference() {
+      cube(size = [frontFaceWidth - sideSupportExtraSpace, sideSupportDepth, railFootThickness]);
+
+      hull() {
+        translate(v = [1.5, 5, 0])
+        cylinder(r = screwRadiusSlacked(rackFrameScrewType), h = inf10, $fn = 32);
+
+        translate(v = [0, 5, 0])
+        cube(size = [eps, screwRadiusSlacked(rackFrameScrewType) * 2, 10], center = true);
+      }
+    }
+  }
+
+}
+
+module railFeetSlot_N() {
+
+  union() {
+    cube(size = [railTotalWidth, railTotalDepth, railFootThickness]);
+
+    translate(v=[1.5, railTotalDepth - 4, -m3HeatSetInsertSlotHeightSlacked])
+    heatSetInsertSlot_N(rackFrameScrewType);
+  }
+}