diff --git a/rack-mount/catalog/brush-strip-plate.scad b/rack-mount/catalog/brush-strip-plate.scad
new file mode 100644
index 0000000..ede52bb
--- /dev/null
+++ b/rack-mount/catalog/brush-strip-plate.scad
@@ -0,0 +1,64 @@
+include <../common.scad>
+use <../plateBase.scad>
+
+
+/*
+A 4U (50mm tall) panel for nylon brush stripping to hide cable shame.
+
+Brush Weather Stripping (0.35" Wide x 0.35" Thick): https://amzn.to/3CLpWMp
+*/
+
+
+
+
+plateU=4;
+plateThickness=3;
+brushstripWidth=8.89;
+brushstripLength=8.89;
+//How far from the edge of the plate the Brush Strip Hole will begin
+brushstripOffset=15;
+//How far the ledges that the brush strip affix too
+brushstripHoleOverlap=5;
+
+
+/* Reckless copying and pasting begins here */
+screwToXEdge=4.5;
+screwToYEdge=4.5;
+uDiff = screwDiff;
+filletR=2;
+screwDx = rackMountScrewWidth;
+screwDy = uDiff * plateU;
+plateLength = screwDx + 2*screwToXEdge;
+plateHeight = screwDy + 2*screwToYEdge;
+railDefaultThickness = 1.5;
+/* End of Reckless copying and pasting? */
+
+
+brushstripLedgeX=plateLength - ((brushstripOffset-brushstripHoleOverlap)*2);
+brushstripLedgeY=5;
+brushstripLedgeZ=brushstripWidth*1.2;
+
+brushstripHoleX=plateLength - (brushstripOffset*2);
+brushstripHoleY=brushstripLength*2;
+brushstripHoleZ=plateThickness*2;
+midPlateY=(plateHeight)/2;
+
+echo("Plate Height: ", plateHeight);
+echo("Plate Length: ", plateLength);
+echo("Vertical distance between 2 main rail holes: ", screwDiff);
+echo("Horizontal distance between 2 opposing main rail holes: ", rackMountScrewWidth);
+echo("Distance between main rail screw, and main rail inner edge:", railScrewHoleToInnerEdge);
+echo("Max supported rack-mount width: ", maxUnitWidth);
+echo("Max recommended rack-mount depth: ", maxUnitDepth);
+
+
+difference(){
+    plateBase(U=plateU, plateThickness=plateThickness, screwToXEdge=4.5, screwToYEdge=5.0, screwType="m4", filletR=2);
+    translate([brushstripOffset,midPlateY-(brushstripHoleY/2),0]) brushstripHole();
+}
+translate([-screwToXEdge+(brushstripOffset-brushstripHoleOverlap),midPlateY-screwToYEdge+(brushstripHoleY/2),0]) cube([brushstripLedgeX, brushstripLedgeY, brushstripLedgeZ]);
+translate([-screwToXEdge+(brushstripOffset-brushstripHoleOverlap),midPlateY-screwToYEdge-(brushstripHoleY/2)- brushstripLedgeY,0]) cube([brushstripLedgeX, brushstripLedgeY, brushstripLedgeZ]);
+
+module brushstripHole(){
+translate([-screwToXEdge,-screwToYEdge,-(plateThickness+1)]) cube([brushstripHoleX, brushstripHoleY, brushstripHoleZ]);    
+}
\ No newline at end of file